AdGuard para Safari 1.11.20
Fecha de lanzamiento: 13 de noviembre de 2024
Esta es una actualización técnica dirigida a aumentar la estabilidad de la aplicación y a corregir errores menores.
Lista de cambios
Scriptlets (Mejora en JavaScript para reglas de filtrado)
Scriptlets actualizados a v1.11.27
AdGuard para Safari 1.11.19
Fecha de lanzamiento: 22 de agosto de 2024
Esta es una actualización técnica dirigida a aumentar la estabilidad de la aplicación y a corregir errores menores.
Lista de cambios
Scriptlets (Mejora en JavaScript para reglas de filtrado)
Scriptlets actualizados a v1.11.16
AdGuard para Safari 1.11.18
Fecha de lanzamiento: 16 de mayo de 2024
Los desarrolladores de filtros han dicho que esta versión bloquea anuncios con mayor eficacia gracias a la actualización de los Scriptlets. ¿Pero será cierto? ¡Ve y compruébalo por ti mismo!
Lista de cambios
Scriptlets (Mejora en JavaScript para reglas de filtrado)
Scriptlets actualizados a v1.10.25
AdGuard para Safari 1.11.17
Fecha de lanzamiento: 4 de marzo de 2024
A veces, una nueva versión no tiene nada de sorprendente, solo es una más entre muchas otras. Esta es una de esas veces: hemos actualizado los scriptlets, las traducciones y los filtros. Sí, estamos introduciendo un conjunto de cambios que no se alejan mucho del estándar, pero con nuestra calidad de siempre.
Lista de cambios
Mejoras
Filtros actualizados
Traducciones actualizadas
Scriptlets (Mejora en JavaScript para reglas de filtrado)
Scriptlets actualizados a v1.10.1
AdGuard para Safari 1.11.16
Fecha de lanzamiento: 20 de noviembre de 2023
Este pequeño lanzamiento ayudará a todos los usuarios que no podían ver vídeos en YouTube sin desactivar la extensión. Hemos actualizado los scriptlets para brindar más flexibilidad a los desarrolladores de filtros al crear reglas de bloqueo de anuncios y asegurar que puedas ver vídeos sin interrupciones. También hemos optimizado la forma en que aplicamos las reglas de filtrado avanzadas. Esto resulta en un bloqueo de anuncios más eficiente en los sitios web.
Lista de cambios
Mejoras
Método de aplicação de regras avançadas melhorado #917
Scriptlets (Mejora en JavaScript para reglas de filtrado)
Scriptlets atualizado para v1.9.91
Importante para el mantenimiento de filtros
Se añadió soporte el preprocesador directivo
!#else adicionado #20
AdGuard para Safari 1.11.15
Fecha de lanzamiento: 6 de octubre de 2023
Puede que pienses que no todos los lanzamientos son motivo de celebración, ya que normalmente consisten en pequeñas mejoras y correcciones de bugs. Bueno, no estamos de acuerdo. Estamos muy orgullosos de presentar una versión renovada de AdGuard para Safari. Nuestro enfoque principal fue asegurar la compatibilidad con el nuevo macOS Sonoma, lo que incluye mejoras generales en nuestra aplicación.
Un icono es mejor que dos
Como algunos de vosotros sabréis, el nuevo macOS Sonoma ha sido lanzado, trayendo un cambio significativo al navegador Safari. Ahora todos los iconos de extensión se muestran en la barra de herramientas por defecto, incluso si no se supone que deben estar allí. Como resultado, el icono de la extensión AdGuard Bloqueo avanzado también acabó en la barra de herramientas, causando frustración a los usuarios.
Para solucionar este problema, hemos fusionado dos extensiones en una, llamada AdGuard para Safari.
¿Y qué más? Hemos corregido con éxito el molesto problema de la apertura del panel de configuración durante el inicio de sesión. Esto se había solucionado anteriormente, pero el problema volvió a aparecer. Ahora todo ha vuelto a la normalidad.
Por último, hemos corregido varios errores en SafariConverterLib, la biblioteca responsable de convertir las reglas de AdGuard a un formato compatible con Safari. Nuestra biblioteca Scriptlets, que contiene scripts cortos parametrizados utilizados para reglas de bloqueo avanzadas, también ha sido actualizada. Ahora depende de ti: ¡actualiza!
Lista de cambios
Correções
EL panel de configuración se abre durante el inicio de sesión #853
El modificador
$match-case no funciona #55Scriptlets
Scriptlets actualizado a v1.9.72
AdGuard para Safari 1.11.14
Fecha de lanzamiento: 21 de julio de 2023
Seguimos mejorando AdGuard para Safari. Esta versión corrige varios problemas de rendimiento del conversor y trae actualizaciones de scriplets, SafariConverterLib y el Asistente de AdGuard.
Lista de cambios
Correcciones
La selección de elementos para bloqueo no funciona en
baidu.com #1246Versión
Asistente AdGuard actualizado a v4.3.70
Scriptlets actualizados a v1.9.37
SafariConverterLib actualizado a v2.0.40
AdGuard para Safari 1.11.13
Fecha de lanzamiento: 12 de mayo de 2023
Hay muchas formas de ayudar a la aplicación a identificar un anuncio. Una de ellas es la pseudoclase
:has(). Con ella, puedes, por ejemplo, pedir a AdGuard que bloquee cualquier elemento llamado banner.Y aquí vienen las buenas noticias: desde la versión 16.4, esta pseudoclase es compatible con Safari y las reglas con ella se pueden aplicar de forma nativa. Esto significa que ya no necesitamos manejar estas reglas desde nuestra librería ExtendedCss (aunque puedes seguir haciéndolo usando el marcador
#?#), el navegador lo hace todo por sí mismo. Y como las reglas se aplican a los propios bloqueadores de contenido de Safari, esto acelera el filtrado. ¡Todos ganamos!En este parche también arreglamos los problemas con el conversor de reglas y actualizamos ExtendedCss y Scriptlets.
Lista de cambios
Importante para los mantenedores de filtros
Considera
:has() como una pseudo-clase por defecto si el uso de ExtendedCss no es impuesto por el creador de reglas #?# #43Versiones
ExtendedCss actualizado a v2.0.52
Scriptlets actualizado av1.9.7
AdGuard para Safari 1.11.12
Fecha de lanzamiento: 23 de marzo de 2023
AdGuard v1.11.12 para Safari introduce un pequeño pero importante cambio para su mejor funcionamiento y una mejor experiencia de usuario.
Hemos corregido un error que nos ha estado molestando durante algún tiempo: la ventana de configuración aparece a pantalla completa después del inicio del sistema operativo. Además, también hemos actualizado Scriptlets y ExtendedCss.
Lista de cambios
Actualizado
ExtendedCss actualizado para v2.0.51
Scriptlets actualizado para v1.9.1
Correcciones
AdGuard para Safari 1.11.11
Fecha de lanzamiento: 9 de febrero de 2023
AdGuard v1.11.11 para Safari presenta varias actualizaciones muy útiles. Agregamos traducciones en varios idiomas de categorías de filtros y la opción de suscribirse a filtros personalizados con solo un clic, sin agregar enlaces manualmente. Además, la opción de Iniciar AdGuard para Safari durante el inicio de sesión ahora está una vez más desactivado por defecto, y también actualizamos ExtendedCss y los scriplets.
Lista de cambios
Actualizado
ExtendedCss para v2.0.45
Scriptlets para v1.8.2
Añadido
Una opción para suscribirse a filtros personalizados al hacer clic en el botón Suscribirse/Añadir
Traducciones de algunas categorías de filtros a diferentes idiomas
Mejorado
Iniciar AdGuard para Safari durante el inicio de sesión está desactivado por defecto
AdGuard para Safari 1.11.10
Fecha de lanzamiento: 26 de diciembre de 2022
En este hotfix, recuperamos la localización para el idioma chino que no aparecía en la versión anterior.
Lista de cambios
Corregido
La traducción al chino no está disponible #777
AdGuard para Safari 1.11.9
Fecha de lanzamiento: 19 de diciembre de 2022
En esta versión corregimos algunos errores, recuperamos la función "Permitir anuncios y autopromoción de sitios web" y actualizamos las traducciones. También añadimos una "X" al cuadro de búsqueda de la pestaña Filtros, y ahora limpiarlos es más fácil.
Lista de cambios
Mejoras
Opción "Iniciar AdGuard para Safari tras iniciar sesión" activada por defecto #729
Se añadió la opción de borrar la barra de búsqueda en la pestaña de filtros
Traducciones actualizadas
Correcciones
"Error desconocido" al añadir un filtro con más de un millón de reglas #720
La extensión muestra incorrectamente el estado en modo "Lista de permisos invertida" #576
La selección en el botón de actualizaciones de la pestaña Filtros no funciona
Las construcciones independientes no se actualizan automáticamente para arm64
#768
El filtro que desbloquea la búsqueda y la autopromoción no funciona en el buscador de Google #37
AdGuard para Safari 1.11.8
Fecha de lanzamiento: 23 de noviembre de 2022
En Safari 16, corregimos un error que hacía que la app aplicara menos reglas activas de las posibles. Además, AdGuard para Safari ahora es más bonito y más fácil de usar.
Lista de cambios
[Mejorado] Barra de desplazamiento oscura en modo oscuro #727
[Mejorado] Mostrar la versión de SafariConverterLib al hacer clic en la versión del producto en la pestaña “Acerca de” #742
[Corregido] Número incorrecto de reglas en Safari 16.0 DB2 #732
[Otro] ExtendedCss actualizado a la v2.0.10
[Otro] Scriptlets actualizados a la v1.6.55
AdGuard para Safari 1.11.7
Fecha de lanzamiento: 18 de agosto de 2022
Esta es una actualización técnica dirigida a aumentar la estabilidad de la aplicación y a corregir errores menores.
Además, hemos actualizado el convertidor de reglas, donde hemos corregido un bug con el modificador
$path en las reglas cosméticas; provocaba un error de compilación para los bloqueadores de contenido en macOS Big Sur.
AdGuard para Safari 1.11.6
Fecha de lanzamiento: 29 de junio de 2022
We're quickly releasing a hotfix for a single but very annoying bug: AdGuard for Safari was preventing other apps (like Safari or Xcode) from responding to the
Cmd+R shortcut. Now everything is working properly.Changelog
[Fixed] AdGuard for Safari app intercepts
Cmd+R shortcut globally when backgrounded #730
AdGuard para Safari 1.11.5
Fecha de lanzamiento: 23 de junio de 2022
Hemos detectado un error grave: la versión del sistema operativo fue detectada incorrectamente. Algunos usuarios podrían tener el problema de que los bloqueadores de contenido fallaban al compilar. Lo hemos corregido. Además, hemos actualizado los scriptlets y añadido el número de compilación al número de versión en la pestaña "Acerca de". Esto último hará que sea más fácil para nosotros ayudarte si decides reportar un error o sugerir una nueva característica. Ambas cosas son siempre bienvenidas en nuestro repositorio de GitHub.
Lista de cambios
AdGuard para Safari 1.11.4
Fecha de lanzamiento: 21 de abril de 2022
En esta versión nos enfocamos en mejorar la interfaz y en corregir errores menores, haciendo que AdGuard para Safari funcione como es debido. En particular, fijamos la clasificación de los filtros, eliminamos un error que hacía que la extensión se bloqueara y eliminamos algunos problemas de la interfaz. También hemos resuelto un problema de compilación errónea de Filtro Base en macOS 11.6.5 + Safari 15.4. Esperamos que esta actualización haga nuestra extensión aún más conveniente para ti.
Lista de cambios
[Mejora] Al habilitar el filtro, éste se desplaza a la parte superior de la lista
[Fijo] La extensión funciona lentamente al habilitar/deshabilitar los filtros, especialmente cuando se utiliza el navegador Safari
[Fijo]
Fallo de compilación para el Filtro base en macOS 11.6.5 + Safari 15.4 #699[Fijo] La barra de búsqueda en la sección Filtro personalizado no funciona #712
[Fijo] Al abrir las reglas de usuario o la lista de permitido en el cuadro de texto, el cursor no aparece #711
AdGuard para Safari 1.11.3
Fecha de lanzamiento: 11 de febrero de 2022
Estado de revisión:
Publicado (implementación por fases a 1%)
¡Te presentamos la nueva versión de AdGuard para Safari! El cambio más importante es el aumento del límite de reglas: ¡ahora es posible utilizar hasta 150.000 reglas en cada bloqueador de contenido!
Hemos logrado triplicar el límite de reglas para cada uno de los seis bloqueadores de contenido: AdGuard General, AdGuard Privacidad, AdGuard Social, AdGuard Seguridad, AdGuard Otros y AdGuard Personalizado. Desde ahora, cada uno de ellos puede contener hasta 150K reglas, lo que seguramente mejorará la calidad del bloqueo de anuncios.
Aparte de eso, quizás hayas notado que nuestro icono ha cambiado. Apple ha solicitado que eliminemos el icono de Safari de nuestro logotipo, y lo reconocemos. Pero seguro que no te confundirás con el nuevo: en realidad no es tan nuevo.
Además, hemos actualizado el convertidor de reglas y los scriptlets, corregido algunos errores menores y esperamos que la extensión de navegador sea aún mejor.
Lista de cambios
[Mejora] Actualizada la localización en alemán #658
[Mejora] Respetado el límite de WKContentRuleList #679
[Mejora] Actualizados Scriptlets y redirecciones de v1.3.17 a v1.5.24
[Mejora] Actualizado ExtendedCss de la v1.3.11 a la v1.3.14
[Mejora] Actualizado Asistente de AdGuard de v4.3.40 a v4.3.43
[Mejora] Añadido soporte para el modificador $path en las reglas cosméticas
[Mejora] Cambiado el icono de la app
[Fijo] La descripción del filtro personalizado se superpone al botón Eliminar #673
[Fijo] Fallo al parsear algunas de las reglas #33
[Fijo] La lista de permitido permanece invertida después de importar la configuración con la lista de permitidos normal
[Fijo] La actualización de la compilación se recarga después de un reinicio manual de la extensión
AdGuard para Safari 1.10.4
Fecha de lanzamiento: 21 de julio de 2021
Meet AdGuard v.1.10.4 for Safari! The new version includes the improved rules converter that will be able to adapt to new Safari features. Besides, we’ve added new translations for German, Swedish and other localizations, fixed conflicting notification statuses and some issues with User rules and Allowlist.
Changelog
[Enhancement] The phrase "Ad blocking in Safari is on/off" was changed to "AdGuard protection is on/paused" #610
[Fixed] German translations were added #581
[Fixed] Missing text in the Swedish translation was added #627
[Fixed] “Back” button behavior for filters’ screens #581
[Fixed] The problem with conflicting notification statuses after filters update was solved #614
[Other] When adding a website to the disabled allowlist, this list will be automatically enabled
[Other] If user adds a rule with the manual element blocking tool on a website, the "User rules" section will be enabled
[Other] While being disabled, the "User rules" section will be also exported with settings export
[Other]
trusted filter tag is no longer translated
AdGuard para Safari 1.9.19
Fecha de lanzamiento: 21 de junio de 2021
AdGuard v1.9.19 for Safari is finally released! We bet you’ve been waiting for it.
You may have noticed that we had already released AdGuard for Safari. Sadly, we found a critical error that forced us to cancel v1.9.17. Now that we’ve fixed this problem, we are re-releasing the new version. Now the extension operates smoothly!
[Added] Apple Silicon Universal build #493
In this version, we’ve added a universal build for the latest M1 chipset. Since the end of 2020, Apple has begun the switch from Intel processors to Apple-designed ones. We’ve been working to make AdGuard for Safari compatible with new ARM-based Macs using Apple M1 processor, and we’re happy to introduce to you the result.
Besides, the new version includes an important fix build signing that caused UI-related issues and other minor fixes and improvements.
AdGuard para Safari 1.9.17
Fecha de lanzamiento: 8 de junio de 2021
Less than two months from the previous release have passed, and we've managed to do a lot during this time.
[Added] Apple Silicon Universal build #493
In this version, we’ve added a universal build for the latest M1 chipset. As promised, we started preparing for the next release with this task. Since the end of 2020, Apple has begun the switch from Intel processors to Apple-designed ones. We’ve been working to make Macs with the new ARM architecture, using Apple M1 processor, compatible with AdGuard for Safari, and we’re happy to introduce to you the result.
Besides, we updated the Safari rules converter and app icon. And naturally, fixed some minor bugs (UI and others).
Changelog
[Enhancement] Added a hotkey to disable the rule #411
[Enhancement] In the “General” and “Filters” sections, the internal content moves upward when starting #529
[Fixed] Element hiding rule converted incorrectly #21
[Fixed] Different description styles in localizations #570
[Fixed] Incorrect behaviour underlining a word in the user list (dark theme) #585
[Fixed] The app infinitely checks for updates, when Wi-Fi is down and there is no Internet #559
[Fixed] When entering the “Content Blockers” section, the “General” tab should be highlighted #552
[Fixed] Asymmetry of text and buttons on the vertical axis of symmetry #593
[Fixed] The location of the reload icon in the “About” tab #558
[Fixed] The link should not be moved to another line #572
[Fixed] In the Russian localization, the “Check for updates” button is moved to another line #577
[Fixed] Decreased the line length and moved the “Relaunch” button #580
[Fixed] The return arrow in “User rules” and “Allowlist” is lower than in other sections #588
[Other] Updated the app icon #579
SafariConverterLib update v1.1.27
[Enhancement] Added
$denyallow modifier support #5[Enhancement] Allowed
*## cosmetic rules #11[Enhancement] Added generic CSS exclusions #15
[Fixed] Added
$specifichide modifier support #6[Fixed] Issue with long multi-domain element hiding rules #8
[Fixed] Element hiding rule with few selectors converted to an incorrect rule #21
[Fixed] The rule with
$ping blocks the whole page #14
AdGuard para Safari 1.9.13
Fecha de lanzamiento: 8 de abril de 2021
Hello there!
Today we are releasing AdGuard for Safari 1.9.13. It has many fixes as you can see by the extensive changelog, but the most important ones would be the fixed memory leak, added dark theme for the element blocking window, fixed inverted allowlist behaviour, and many general user interface improvements.
Speaking of design, see how beautiful and intuitive it looks now
User rules are now available in the Filters section:
Changelog
[Added] Explanation of the permissions AdGuard for Safari uses #276
[Added] "Export Logs" button in General settings #466
[Added] Dark theme for "Block element on page" #476
[Added] Autosave when importing rules #555
[Enhancement] Modified UI behavior #402
[Enhancement] The application icon is different from the extension icon #458
[Enhancement] Moved the funnel and the green bar to the right side #463
[Enhancement] Added a warning when selecting “Update interval - Do not update” #527
[Enhancement] Content in the “General” and “Filters” sections moves upward when switching between them #529
[Enhancement] Improved the export of inverted allowlist #544
[Fixed] AdGuard isn't compatible with Web Annoyances Ultralist filter list #390
[Fixed] $jsinject doesn't disable JS rules #484
[Fixed] Update icon is cropped at the bottom #494
[Fixed] Memory leak #505
[Fixed] JS exceptions thrown on filter update/compilation (v1.9.3beta/v1.9.5beta on macOS 10.13.6) #525
[Fixed] When Safari launches, the old AdGuard icon is loaded #528
[Fixed] Pausing AdGuard doesn’t work properly #535
[Fixed] Error when converting rules to Safari content blocking syntax #537
[Fixed] “Allowlist” remains on when the slider is off #539
[Fixed] The memory leak grows to 2GB, AdGuard for Safari doesn’t respond and crashes #542
[Fixed] Format tag not replaced by the number of filters #566
[Fixed] “Invert allowlist” behaviour #568
[Fixed] Small typos in source code files and formatting errors #403
[Fixed] Checkbox in extension menu is not visible in dark theme #491
[Fixed] The extension icon flickers while in pause mode when you refresh the page or switch tabs #497
[Fixed] Wrong hyperlink color on the "About" page in dark theme #498
[Fixed] Close the AdGuard Assistant window after clicking the “Report this website” #530
[Fixed] Time changes when updating from the “Filters” section #538
[Other] Improvements and UI fixes v.1.9.5 #543
[Other] Minor fixes & improvements
[Other] Localisation fix
AdGuard para Safari 1.8.10
Fecha de lanzamiento: 7 de diciembre de 2020
If you imagined the most minimalistic release ever, here it is. In this version, we have rounded off rough corners, ironed out the kinks and fixed the problem with the AdGuard Advanced Blocking module. A release is not always a truckload of changes. Minor updates are also needed, they allow us to support the products at a high level.
Changelog
[Fixed] Sometimes AdGuard Advanced Blocking works incorrectly
[Other] Minor fixes and improvements
AdGuard para Safari 1.8.9
Fecha de lanzamiento: 4 de diciembre de 2020
Unfortunately, the previous update wasn't ideal. We have to apologize and admit that we made some mistakes there that require immediate fixing. And Big Sur doesn't make it easier too. In this release, we keep on fixing compatibility issues and other bugs.
Changelog
[Fixed] JavaScript user filter does not run on all websites #394
[Fixed] The scriptlet doesn't apply in iframe #395
[Fixed] AdGuard Security extension fails to load (intermittently) #454
[Fixed] The French filter is still causing an issue #456
[Fixed] AdGuard 1.8.8 for BigSur on Safari 14.0.1 doesn't block ads #461
[Fixed] macOS Big Sur Safari Adguard Advanced Blocker - Gmail won't load #464
[Fixed] YouTube scrolling is laggy #469
[Fixed] The cosmetic rule doesn't work #471
[Other] GH builds are not signed (high sierra) #453
AdGuard para Safari 1.8.8
Fecha de lanzamiento: 28 de noviembre de 2020
This release brings a lot of fixes and improvements. Namely, it's better compatibility with macOS High Sierra (used to have troubles) and a revamped macOS Big Sur style icon (used to look too old-school), improved logging and a fix for Gmail compatibility issue.
Changelog
[Enhanced] The archive generated by "Export logs and system info" also includes content blockers JSON files
[Enhanced] Empty strings are not removed anymore #410
[Fixed] Verbose logging is inconsistent after switching from standalone to mas and vice-versa #443
[Fixed] The response field of the return button has moved down #446
[Fixed] AdGuard 1.8.6 on macOS Big Sur 11.0.1 with Safari 14.0.1 breaks Gmail #433
[Fixed] After saving the rules in editor all text becomes selected #408
[Fixed] Compilation error message on AdGuard for Safari #418
[Fixed] Font bug in "Block element on page" #405
[Fixed] High Sierra and Safari Converter Lib #419
[Fixed] Scriptlets + Cosmetic rules aren't applied #421
[Fixed] Extension UI needs to be improved #426
[Fixed] Spacing in the extension menu #415
[Fixed] Inaccuracies in the user interface #424
[Other] "Compilation failed" #434
[Other] UI improvements to General settings #416
[Other] Updated copyright info #423
[Other] Updated the "Custom Filter" window to match Big Sur guidelines #417
[Other] Revamped Big Sur style icon #413
AdGuard para Safari 1.8.6
Fecha de lanzamiento: 20 de noviembre de 2020
This update brings a fix for an important filtering issue and few minor UI improvements.
AdGuard para Safari 1.8.5
Fecha de lanzamiento: 13 de noviembre de 2020
You had to wait for some time for this AdGuard for Safari update, and we did everything we could to make the wait worthwile. From several new options to export/import user settings, blocklists, allowlists, and user rules — to multiple bugfixes and enhancements. v1.8.5 makes ad blocking in Safari better and much more convenient.
[Added] User rules and Allowlist Export/Import feature #320
This feature is present in every other AdGuard app or browser extension, so it made a ton of sense to add it to AdGuard for Safari too. You can export your User rules to a local file at any time, as well as import from a file. Same goes for Allowlist; note that if you switch to Inverted Allowlist, you can export/import it too. All in all, it's useful when you want to reinstall the extension for any reason or transfer your preferences between browsers/devices.
[Added] User settings Export/Import feature #16
Speaking of. Just as with User rules and Allowlist, it's now possible to do the same for your settings configuration. By the way, export feature will take into account which filters you have currently enabled too, even including your custom filters.
Changelog
[Fixed] Custom filter description
[Fixed] Problems with "Applications" folder
[Fixed] The icon is displayed incorrectly
[Fixed] Custom filters aren’t updating
[Fixed] Error is shown when moving adguard safari to applications folder #397
[Fixed] Console errors #377
[Fixed] Custom filters' last update timestamp isn't updated #348
[Fixed] "Open preferences" splash screen can't be dismissed #383
[Fixed] Filters' metadata is treated as filtering rules
[Fixed] Custom name for custom filter bug
[Fixed] Filter updates don't update metadata
[Fixed] "Allow search ads and self-promotion" filter's state isn't synced between the main page and "Filters" page
[Other] Malware Domains Blocklist replaced with Online Malicious URL Blocklist #374
[Other] Updated to Electron 9
AdGuard para Safari 1.8.2
Fecha de lanzamiento: 24 de agosto de 2020
This release brings a lot of fixes and small UI/UX improvements. Namely, we added Dark Mode and automatic mode switch support, updated localizations, and removed obsolete filters.
[Added] An option to import custom filters from a local file #345
It's not always convenient to maintain a custom filter in a cloud. Now you have an alternative: create a local text file, edit it according to our filtering rules syntax and add it to your AdGuard for Safari. Voila, you have a new custom filter, just like any other.
[Added] Dark Mode for versions starting from macOS Mojave (10.14) and automatic mode switch support for versions starting from macOS Catalina #120
[Improved] Updated Electron to v8.0 #286
In a nutshell, Electron is a framework for building cross-platform desktop apps. AdGuard for Safari extension is made on it, so upgrading the framework solved lots of UI issues.
[Improved] Removed autosave in the filter editor and added the Save button
It turned out that autosave caused UI problems. We removed it. Now you can save filters by pressing Ctrl + S or by clicking the Save button.
Changelog
[Fixed] Extension icon is too dark with a Mac dark theme #230
[Fixed] Error when adding a custom filter list #340
[Fixed] Advanced ad blocking scripts are executed even when the page is whitelisted #346
[Fixed] Issues with
prevent-setTimeout scriptlet #347[Fixed] Custom filters' last update timestamp isn't updated #348
[Fixed] Buttons in Safari popup menu are not clickable and have wrong color #358
[Fixed] Previously removed custom filters reappear after an update #363
[Fixed] Switching system theme causes the indefinite 'Checking for updates' state #366
[Improved] Extension icon behavior logic #338
[Improved] Whitelist and User Rules text areas are now resizable #339
[Improved] Translations have been updated
[Other] "Checking for updates" is not visible in dark mode #360
[Other] Custom filters deactivate after closing AdGuard #361
AdGuard para Safari 1.7.4
Fecha de lanzamiento: 30 de marzo de 2020
We've released this hotfix to fix one pesky bug that was causing the extension to freeze after a reboot.
[Fixed] AdGuard for Safari freezes after a reboot #331
AdGuard para Safari 1.7.2
Fecha de lanzamiento: 18 de marzo de 2020
AdGuard para Safari 1.7.1
Fecha de lanzamiento: 4 de marzo de 2020
We’re releasing this small AdGuard for Safari update to fix a few pesky bugs and update localizations.
[Added] A confirmation dialog before closing the main window #324
[Fixed] Settings panel opens at login #204
[Fixed] AdGuard reappears in the Recent Applications section during filter updates #317
[Fixed] AdGuard logo stays in the dock even after the app becomes inactive #308
[Fixed] Crash on closing the main window on macOS 10.15.2 #323
[Improved] Update Scriptlets and Extended CSS libs
[Changed] Localizations have been updated
AdGuard para Safari 1.6.4
Fecha de lanzamiento: 16 de enero de 2020
You could call AdGuard v1.6 for Safari a jack of all trades. It has a little bit of everything: bugfixes, UI changes, ad blocking quality improvements. Some would say it robs it of its identity, but the best identity is being a useful update, which it is.
Ad Blocking
[Fixed] Cosmetic CSS exception rules break other rules #282
[Improved] Scriptlets and Redirect resources #237
[Improved] Conversion between different syntaxes #236
[Improved] ExtCSS has been updated to v1.1.5 #277
[Improved] Wildcards (
*) in filtering rules can now match top-level domains #248Network
[Changed] Hardware acceleration is now enabled by default with an option to disable it from general settings #299
[Fixed] Safari freezes for a few seconds during filter updates #168
[Fixed] Safari launches with a delay #209
[Fixed] Safari hangs when AdGuard is enabled #257
[Fixed] An issue with affinity directive #274
UI
[Added] First run splash screen #243
[Added] Notification about continuous blocking before closing AdGuard #146
[Changed] Filters’ icons and "About" tab design #238
[Changed] "Some AdGuard extensions are disabled” notification is no longer permanent #253
[Changed] Text on the button to resume paused protection #249
[Changed] User filter is now displayed among the content blockers #252
[Fixed] Incorrect user rules count indication #280
[Fixed] Custom group screen closes after adding a new custom filter #224
[Fixed] UI slowdown on filters state change #233
[Fixed] When AdGuard is running in the background it becomes unresponsive indefinitely #284
[Fixed] Protection status in the app menu is displayed incorrectly #292
Other
[Added] "Export logs and system info..." option to the status bar menu #272
[Changed] The application now starts minimized #264
[Fixed] Settings window opens at login #204
[Fixed] AdGuard is unresponsive when launched automatically at login #265
[Fixed] Long response times in extension settings #229
[Fixed] “Pause AdGuard” button doesn't pause protection #300
[Improved] Removed unnecessary log entries #269
[Improved] Handling of the “Content blocker can’t be registered” case #244
[Improved] Localizations have been updated
How to install AdGuard for Safari
AdGuard para Safari 1.5.4
Fecha de lanzamiento: 20 de septiembre de 2019
Finally! We are pleased to present you a new, improved, more stable extension for Safari. We have introduced a new “Content Blockers” tab, increased the maximum number of filtering rules, improved the design a bit, fixed a lot of bugs and added special notifications that will keep you in the know whether all blockers are turned on. This is a fairly large update, which, we hope, will help you surf the Internet with even more safety and confidence.
[Added] Dedicated tab “Content blockers” #223
A new tab which is located in the “General” section allows you to monitor the status of filter groups in real time without the need to delve into Safari settings. In addition, it will allow you to quickly find out which filters are ON in a particular group and how many rules are in use.
[Improved] Total number of rules used simultaneously #93
Everything has changed. An improved version of the extension for Safari allows you to use 6 times more rules! Now, the total number of rules that can be used simultaneously is 300.000 (50.000 per group). The improvement in filtering quality because of this change is hard to overestimate. Turn on more filters and don’t hold back!.
[Improved] Support for Catalina OS #172
With this update, everyone using this operating system can breathe easy, because now
AdGuard fully supports Catalina OS.
AdGuard fully supports Catalina OS.
[Added] Notifications when one of the content blockers is turned off #221
[Fixed] “Open settings” button on the start screen doesn’t work #219
[Fixed] Error after adding custom filter #225
[Fixed] JavaScript error when closing settings via application shortcut #214
[Fixed] Displaying the wrong version of the extension in the “About” tab #218
[Fixed] Adding a site to the “Whitelist” through extension icon in the browser does not work #215
[Fixed] Filters update animation #233
[Improved] Extension start page #222
[Improved] Size of extension icon on control panel #149
[Improved] Localizations have been updated
AdGuard para Safari 1.4.1
Fecha de lanzamiento: 11 de julio de 2019
In this version, we fix several crashes and address other stability issues. Also, AdGuard for Safari now supports scriptlets (this is a new tool to enhance ad blocking quality).
[Added] Scriptlets support #151
Scriptlets are a powerful ad blocking instrument. You can say that a scriptlet is an internal script (a mini-program) that we preinstall to AdGuard for Safari, and then execute that script with the help of filtering rules. Putting it simply, scriptlets allow us to modify how the code of the web page behaves. As for the practical use, this helps in many situations, for example, to circumvent anti-ad blockers.
[Added] "Verbose logging" option to General settings #174
[Changed] The app now opens in background at login #141
[Changed] Notifications for background filters updates have been disabled #195
[Changed] AdGuard notifications now appear in Safari console only when verbose logging is enabled #148
[Fixed] Sometimes whitelisted websites are still filtered #98
[Fixed] AdGuard crashes when you close the settings window with
Cmd + w command #182[Fixed] Incorrect custom filter rules count in RU locale #183
[Fixed] Layout issue on About screen after a new update is found #184
[Fixed] Some crashes of the Mac App Store build #197
AdGuard para Safari 1.3.3
Fecha de lanzamiento: 11 de junio de 2019
It took us a bit more than a month to update AdGuard for Safari from v1.1 to v1.2, and almost half a year to get to v1.3. As you know, if we do something for so long, it's probably going to be worth it. This time is not an exception: on top of multiple smallish but important changes and fixes, we have two big ones. First is the addition of standalone builds, including Beta build. Second is even cooler: AG for Safari now supports advanced ad blocking rules, and this is very unusual for Safari ad blockers (thanks, Apple restrictions). In fact, AdGuard is the only one who does it. Enough talk, update to v1.3 and see for yourself.
[Added] Release and Beta standalone builds for AdGuard for Safari #153
AdGuard for Safari has quickly become a real member of AdGuard product family. And what is a better initiation rite for an app than getting its own beta channel? That's right, you can now get an early access to all AG for Safari updates. How do you do it? You go to GitHub, open the latest beta version there and download the beta archive. Notice that there's another one: a release standalone build (its identical to the App Store one but is distributed via GitHub).
WARNING: Installing either of the standalone builds on top of the App Store version will lose you all current settings, so make sure to save all your custom rules beforehand.
[Added] Advanced blocking rules in Safari #114
As you probably know, Apple is always eager to restrict something when it comes to ad blockers. Safari ad blocking extensions are one of the primary targets, thanks to Apple limitations it is non-trivial for them to support some of the more advanced filtering syntax. In particular, JS and ExtCSS rules. But we managed, and proud to say that AG for Safari will provide an even higher ad blocking quality than before.
Ad blocking
[Added] An option to mark custom filters as "Trusted" to get access to advanced ad blocking rules #156
[Changed] Safari filter incorporated into Base filter and marked as obsolete #137
[Fixed] Adding Custom filter is broken #164
[Fixed] Some JS and CSS rules don't work #144
[Improved] ExtendedCss has been updated #138
UI
[Added] "Сheck for updates" button to the standalone build menu #154
[Changed] Clicking on "About" in the tray menu now opens "About" section of UI #155
[Changed] Translations have been updated
[Fixed] AdGuard for Safari window doesn't open from Applications/Launchpad #118
[Fixed] Custom filter rules count is displayed incorrectly #157
[Fixed] Filter updates notifications are missing #166
[Fixed] Filters update notification mentions only one filter #116
[Fixed] The description of Safari extension #181
[Fixed] Total rules count is displayed as zero right after the installation #173
[Improved] Titles of custom filters can be modified now #143
Other
AdGuard para Safari 1.2.0
Fecha de lanzamiento: 28 de marzo de 2019
This update comes shortly after the previous one, so not too many changes here: Menu Bar icon was made optional, some quality of life changes were introduced.
[Changed] Menu Bar icon is now optional #84
In the previous update we made the Safari icon optional; it was only logical to make the Menu Bar one optional too. You can even disable them both if you go full minimalistic 🙂 Go to AdGuard preferences if you want to hide it.
[Added] "Pause AdGuard"/ "Enable AdGuard" option to extension menu #83
[Fixed] "Allow search ads..." option is not greyed out despite being disabled #102
[Fixed] Rules pasted from the clipboard are not saved in Filter editor #96
[Fixed] User filter is marked as "Saved" when the app is just started #95
[Improved] Dropdown style #94
[Improved] Localizations have been updated #97
[Improved] Scriptlets and snippets are now ignored properly #92
[Improved] Filter are now automatically updated after you enable them #89
