Skip to main content

How to set up outbound proxy

:::정보

This article is about AdGuard for Android, a multifunctional ad blocker that protects your device at the system level. To see how it works, download the AdGuard app

:::

Below is a list of the most well-known applications that can be configured to work as proxies in AdGuard.

note

If your app is not listed below, please check on its proxy configurations in the settings or contact its support team.

AdGuard allows you to route your device's traffic through a proxy server. To access proxy settings, open Settings and then proceed to Filtering → Network → Proxy.

Proxy configuration examples​

In this article we give examples of how to set up some of the most popular proxies to work with AdGuard.

Tor와 함께 AdGuard를 사용하는 방법​

  1. Open AdGuard and go to Settings → Filtering → Network → Proxy. Download “Orbot: Proxy with Tor” directly from Google Play or by tapping Integrate with Tor and then Install.

  2. Orbot을 열고 애플리케이션의 메인 화면에서 시작 버튼을 누릅니다.

  3. Go back to the Proxy screen of AdGuard.

  4. Tor와 통합 버튼을 누릅니다.

  5. All the required fields will be pre-filled:

    필드값
    프록시 유형SOCKS4 또는 SOCKS5
    프록시 호스트127.0.0.1
    프록시 포트9050

    Or you can tap Proxy server → Add proxy server, enter these values manually, and set Orbot as the default proxy.

  6. Enable the main Proxy switch and AdGuard protection to route your device's traffic through the proxy.

    Now AdGuard will route all traffic through Orbot. If you disable Orbot, Internet connection will be unavailable until you disable the outbound proxy settings in AdGuard.

PIA(Private Internet Access)와 함께 AdGuard를 사용하는 방법​

Here we presume that you are already a PIA VPN client and have it installed on your device.

  1. Open AdGuard and go to Settings → Filtering → Network → Proxy → Proxy server.

  2. 프록시 서버 추가 버튼을 누르고 다음 데이터를 입력합니다.

    필드값
    프록시 유형SOCKS5
    프록시 호스트proxy-nl.privateinternetaccess.com
    프록시 포트1080

  3. You also need to fill out the Username/Password fields. To do so, log in to the Client Control Panel on the PIA website. Tap the Generate Password button under the Generate PPTP/L2TP/SOCKS Password section. A username starting with “x” and a random password will be shown. Use them to fill out the Proxy username and Proxy password fields in AdGuard.

  4. Tap Save and select.

  5. Enable the main Proxy switch and AdGuard protection to route your device's traffic through the proxy.

TorGuard와 함께 AdGuard를 사용하는 방법​

Here we presume that you are already a TorGuard client and have it installed on your device.

  1. Open AdGuard and go to Settings → Filtering → Network → Proxy → Proxy server.

  2. 프록시 서버 추가 버튼을 누르고 다음 데이터를 입력합니다.

    필드값
    프록시 유형SOCKS5
    프록시 호스트proxy.torguard.org or proxy.torguard.io
    프록시 포트1080 or 1085 or 1090

  3. For Username and Password fields, enter your proxy username and proxy password you have chosen at TorGuard signup.

  4. Tap Save and select.

  5. Enable the main Proxy switch and AdGuard protection to route your device's traffic through the proxy.

NordVPN과 함께 AdGuard를 사용하는 방법​

  1. Log in to your NordVPN account.

  2. Go to Services → NordVPN → Manual setup and set up your service credentials manually.

  3. You will receive a verification code on the email address you use for NordVPN. Use it on your NordVPN account as requested, then tap Apply and OK to save the changes.

Manual setup

  1. Open the AdGuard app, go to Settings → Filtering → Network → Proxy → Proxy server → Add proxy server.

  2. Enter the following data:

    필드값
    프록시 유형SOCKS5
    프록시 호스트Any server from this list
    프록시 포트1080

  3. Enter your NordVPN credentials in the Username and Password fields.

  4. Tap Save and select.

  5. Enable the main Proxy switch and AdGuard protection to route your device's traffic through the proxy.

Shadowsock과 함께 AdGuard를 사용하는 방법​

Here we presume that you have already configured a Shadowsocks server and a client on your device.

note

You should remove Shadowsocks app from filtering before setting up the process (App management → Shadowsocks → Route traffic through AdGuard) to avoid infinite loops and drops.

  1. Open AdGuard and go to Settings → Filtering → Network → Proxy → Proxy server.

  2. Tap the Add proxy server and fill in the fields:

    필드값
    프록시 유형SOCKS5
    프록시 호스트127.0.0.1
    프록시 포트1080

  3. Tap Save and select.

  4. Enable the main Proxy switch and AdGuard protection to route your device's traffic through the proxy.

How to use AdGuard with Clash​

Here we presume that you are already a Clash client and have it installed on your device.

  1. Open Clash and go to Settings → Network → Route System Traffic and toggle the switch. This will set Clash to proxy mode.

  2. Open AdGuard and go to App management. Choose Clash For Android and disable Route traffic through AdGuard. This will eliminate traffic looping.

  3. Then go to Settings → Filtering → Network → Proxy → Proxy server.

  4. Tap Add proxy server and fill in the fields:

    필드값
    프록시 유형SOCKS5
    프록시 호스트127.0.0.1
    프록시 포트7891

제한​

However, at least one factor may prevent certain traffic from being routed through the outbound proxy, even after configuring the AdGuard proxy settings. That would be if the app itself isn't configured to send its traffic through AdGuard. To do it, you need to proceed to App management, choose the app, and turn on Route traffic through AdGuard.